Panasonic WV-SW352 Guia de Instalação descarregar pdf (Página 18)

When installing the camera on a wall or a ceiling, there are two methods as specified below.

 • Usingatwo-gangjunctionbox

 • Usethesuppliedmountbracket

Important:

 • Procure 4 screws (M4) to secure the camera attachment (accessory) or the mount bracket

(accessory) to a wall or a ceiling according to the material of the installation area. Do not use

wood screws and nails.

For mounting a camera on a concrete ceiling, use an anchor bolt (for M4) or an AY plug bolt

(M4) for securing.

(Recommended tightening torque M4: 1.6 N·m {1.18 lbf·ft})

 • Mountthecameraattachmentinconsiderationofthecameraangleinaccordancewiththe

instructions (

☞ pages 19 and 20).

 • Requiredpull-outcapacityofasinglescrew/boltis196N{44.06lbf}ormore.

 • Ifaceilingboardsuchasplasterboardistooweaktosupportthetotalweight,theareashall

be sufficiently reinforced.

The mounting conditions of the camera are described as follows:

Installation

place

Appropriate mount

bracket

Recommended

screw

Number of

screw

Minimum pull-out

strength (per 1 pc.)

Ceiling/wall Two-gang junction box M4 4 pcs.

196 N {44.06 lbf}

Ceiling/wall* Mount bracket (accessory)

(Approx. 350 g {0.77 lbs.})

M4 4 pcs.

196 N {44.06 lbf}

* The conditions for securing the mount bracket to a wall or a ceiling are described here.

Preparations

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Sem comentários

Panasonic WV-SW352 Guia de Instalação Página 18