Panasonic DMC-3D1 Instruções de Operação descarregar pdf (Página 137)

- 137 -

Connecting to other equipment

Preparations:

Turn on the camera and the PC.

Remove the card before using the pictures in the built-in memory.

A USB connection cable (supplied)

• Check the directions of the connectors, and plug them straight in or unplug them straight out.

(Otherwise the connectors may be bent out of shape which may cause malfunction.)

B Align the marks, and insert.

• Use a battery with sufficient battery power. If the remaining battery power becomes low while

the camera and the PC are communicating, the alarm beeps.

Refer to

“Disconnecting the USB connection cable safely” (P139) before disconnecting the

USB connection cable. Otherwise, data may be destroyed.

Connect the camera to a PC via the USB connection cable A

(supplied).

• Do not use any other USB connection cables except the supplied one. Use of cables

other than the supplied USB connection cable may cause malfunction.

Acquiring of still pictures and [MP4] motion pictures

(other than 3D motion pictures and [AVCHD] motion pictures)

Touch [PC].

• If [USB Mode] (P57) is set to [PC] in the [Setup] menu in advance, the camera will be

automatically connected to the PC without displaying the [USB Mode] selection screen.

• When the camera has been connected to the PC with [USB Mode] set to

[PictBridge(PTP)], a message may appear on the PC’s screen. Select [Cancel] to close

the screen, and disconnect the camera from the PC. Then set [USB Mode] to [PC]

again.

Operate the PC.

• You can save the images into the PC by drag and drop the image or the folder with the

image you would like to transfer onto the different folder in the PC.

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 162 163

Sem comentários

Panasonic DMC-3D1 Instruções de Operação Página 137