Panasonic SDRS150 Instruções de Operação Página 74

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 116
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 73
74
VQT0X49
Images recorded by this unit can be played back on a TV.
¬Insert an SD card with recordings into the unit.
1 Open the terminal cover and then
connect the multi cable (supplied) to
the multi-connector terminal [MULTI]
and the TV.
1 Multi cable (supplied)
Insert the plugs as far as they will go.
If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor (optional) is
necessary. Consult your dealer.
If the TV has an S-Video terminal, then also
connect an S-Video plug. It allows you to
enjoy more beautiful images.
(You must also connect the Video/Audio input
terminals.)
Use the AC adaptor to free you from worrying
about the battery running down.
2 Turn on this unit, then set the mode to
[] or [ ].
3 Change the input channel on the TV.
<TV setting>
Example: Set the channel to “VCR2” etc. (The channel set will differ depending on the
terminal to which the cable is connected.)
4 Start playback on this unit. (P61, 64)
The image and audio are output on the TV.
If the image or audio from this unit is not output on the TV
Check that the plugs are inserted as far as they go.
Check the connected terminal.
You may not be able to playback motion pictures recorded to SD card on this unit by
inserting the SD card into a TV with a built-in SD card slot.
Check the TV’s input setting (input switch). (For more information, please read
the operating instructions for the TV.)
Playback on TV
21-pin Adaptor
MULTI
[VIDEO IN]
[S-VIDEO IN]
1
[AUDIO IN]
VQT0X49ENG.book 74 ページ 2006年6月6日 火曜日 午後2時1分
Vista de página 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 115 116

Comentários a estes Manuais

Sem comentários