Panasonic WV-ASC970 Instruções de Operação

Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.The model number is

10● Recorder Search FunctionsThe system provides operators with the following recorder search functions: • Date-and-timesearchplayback • Recor

11Note: • Toselectalocaltoursequence,justenterthelogicaltoursequencenumber.(Refertop.45.) • Thesystemsupportsupto256tourseq

12 Global Camera NumberingThis function allows operators to select global camera by just input a logical camera number that is unique number in the

13● Return to Current NumberingIf operators would like to return to the current numbering, the system administrator should turn off the global cam-e

14 Alarm Export to other Domains● Alarm Export FunctionThis function allows a local alarm to export to other system domains. ● Assign Alarm Expo

15 Digital Input and Output FunctionsThis function allows operators to select and set digital output ports. The system alarm function can program th

16 Support Multicast Auto StartIn order to display one network camera video on multiple monitors, the System Server can turn on the multicast stream

17 Alive MonitoringThe System Server checks whether Matrix Switchers, Hard Disk Recorders, IP cameras, Network Disk Recorders and IP Encoders are al

18Basic System Configuration Examples Standard System with IP switch node Standard System contains one Server. It can handle up to 1024 network came

19● Network Camera SetupRefer to each network camera Operational Manual.Network Cam #IP Address Subnet Mask Port MPEG4 Multicast Multicast AddressMu

2CONTENTSIntroduction ... 4  Overview ...

20 Hybrid System with IP switch node and SX650 switch nodeThe following system contains one IP switch node and one SX650 video switch node. The anal

21● Network Camera SetupRefer to each network camera Operational Manual.Network Cam #IP Address Subnet Mask Port MPEG4 Multicast Multicast AddressMu

22● Digital Disk Recorder WJ-HD316A SetupRefer to WJ-HD316A Operational Manual to set following configuration.DVR# Line Speed HTTP PORT DHCP IP Addre

23 Multiple System Domain with Single IP switch nodeThe following system includes two system domains. Each system domain has IP switch node and can

24● Network Camera SetupRefer to each network camera Operational Manual.Network Cam #IP Address Subnet Mask Port MPEG4 Multicast Multicast AddressMul

25Basic System Setup Procedure Define a System Domain● Number of System DomainsBy definition, each system domain must have a Server PC. (If it is

26● Enter Cameras/Encoders and Decoders in the WV-ASC970 Admin ConsoleAfter deciding the Unit ID for each encoder and decoder, the next step is to e

27● Links between two SX650 Switch NodesIn general, you can find video links from a matrix switch output to a matrix switch input. These links must

28 Other Setup● AlarmsTo trigger alarms, setup the alarm source devices and register them to Alarm Source database by using Admin Console.# Alarm

29Note: • "analogcamera"standsforPanasonicanalogcameras. • "DVR"standsforPanasonicDigitalDiskRecorder/NetworkDi

3● Links between two SX650 Switch Nodes ... 27● Enter Video Links in the WV-ASC970 Admin Console ...

30 Redundant SystemWhen an ASC970 System includes both a Main CPU and a Backup CPU, it is called a Redundant System. In this case, one of the WV-ASC

31System Configuration FileIf there are more than one serial ports on the WV-ASC970 Server, you need to enter the correct port number in the [REDUNDAN

32 WJ-ND400 Backup SystemWhen an ASC970 System includes both Main WJ-ND400 and Backup WJ-ND400, it is called the WJ-ND400 Backup System. When the AS

33● For Manual Switchover OperationYou can switchover the Main WJ-ND400 to Backup WJ-ND400 manually.For more details, please refer to the WJ-ND400 B

34● Example Case (For Automatic Switchover Operation) 1. WJ-ND400 Backup System contains three Main WJ-ND400s and two Backup WJ-ND400s. 2. WV-ASC9

35 6. WV-ASC970 detects that Main WJ-ND400 #3 becomes offline. 7. WV-ASC970 cannot switch over because all Backup WJ-ND400s are working instead of M

36Note • TouseWJ-ND400BackupOperation,firmwareversionofWJ-ND400shouldbe3.2. • IfallBackupWJ-ND400sareworkinginsteadofMainWJ-ND

37 Default Status (LCD Display After Login) q Monitor number The number of connected monitor is displayed. w Unit number/Status The number o

38Login and Logout Operation Start (Login) 1. Turn on the power switches of all system compo-nents. 2. Turn on the power of system controller.

39After the login procedure, the following operations are available to control the system.The operation begins with monitor selection. Then, the image

4Introduction OverviewThe WV-ASC970 is distributed video security system software capable of supporting up to 64 security system domains. The WV-ASC

40Display Setting for Controller Adjustment of LCD Display and BuzzerYou can perform the settings of LCD brightness, LCD contrast, alarm buzzer, or

41 Lens ControlNote: • Checkthataspecifiedlens,withmotorizedzoom/focus functions, is mounted on the camera, and the lens selection (DC/VIDE

42 2. To move the camera to the position to be preset, move the 3D joystick and press the lens control buttons. 3. To select the desired preset posi

43 Defroster ControlThe following procedure is available when a selected camera (housing) is equipped with a defroster. 1. Select the desired monit

44 Camera Function (Shortcut Function)The following function is available only when specified cameras with the camera function feature are used.This

45Running Sequence Tour SequenceThe following functions are available if a Tour Sequence has been previously configured through the admin con-sole.

46 2. Press the TOUR SEQ/GROUP SEQ button while holding down the SHIFT button. The Group Sequence will run in forward direction on the assigned monit

47Monitor Display ControlNumber of characters displayed on the monitor screen differs depending on systems. • GX System (NTSC model only), System850

48 Alarm Status TableRefer to p. 56 Alarm Status Table.Note: • OnlyWJ-SX650orWJ-SX850switchnode Video Loss Status TableRefer to p. 57 Video

49Alarm Control Alarm SelectionTo control alarm behaviors, you need to select a desired alarm number. 1. Select a desired alarm number by pressing

5 Software License (Licence)This product includes a software component that is licensed by Info-Zip. For more details, refer to "Readme" f

50 To Operate Alarm-related Camera (ACK)You can operate the camera associated with the alarm action as follows: 1. Perform Step 1 and 2 of Alarm Se

51 Alarm History TableThere are 1000 alarm records stored in chronological order in 125 pages of table. 1. Select a desired monitor. (Refer to p. 3

52Recorder Control Recorder SelectionYou can select a recorder by performing either of the following. • Recorderautoselection • Recordermanua

53Menu Function Descriptions Menu FunctionsNo. Function001 Camera Setup002 Auto Mode003 BW Mode004 Patrol Control005 Group Preset006 OSD Control007

54Menu Function Details Camera SetupNote: • Thefollowingfunctionrequirestheuseofcamerassupporting this function. • Thedetailsonthese

55 F3: Auto1 Activates Auto 1 mode. (The camera selects black and white mode if the picture is dark, or color (colour) mode if the picture is br

56 F3: Gen Displays or hides the general status display. F4: Mon Displays or hides the monitor status display.Note: • Refertotheillus

57 Video Loss Status TableThe table shows the video loss detection statuses. 1. Select a desired monitor. (Refer to p. 39 Monitor Selection.) 2. D

58MON: Monitor number-A-: Area numberCAM/DVR/SEQ: <Example>C6400001: Unit 64, Camera 1R6400001: Unit 64, Recorder 1T640010001P: Unit 64, Area 1

59STATE: Indicates video loss changes.OK: Video loss is recovered.LS: Video level is below normal and in sync.VL: Video level is below normal and out

6Terms and Definitions Video Switch NodeA video switch node is a device or a group of devices that are capable of performing a video switch from any

60Appendix 1WJ-SX650 512 x 64 Matrix System Configuration Example● OverviewOne WV-ASC970 Server can handle up to six SX650 SubNodes (include two SX6

61● Network Board InstallationThe back panel (OUT X-1) of Video Output Board 1 should be replaced by Network Board WJ-PB65E01.● Connect with WV-AS

62SX650 Output Board MODE Switch Settings(Bit Order : 1-2-3-4-5-6-7-8)● MODE Switch SettingsEachmatrixswitcher'sVideoOutputBoard1should

63● Vertical Interval SynchronizationConnect the coaxial cables as shown below.CBACBACBACBASet DIP SW4005 Bit4 to ON for each Video Output Board 1.

64*1-3 Video Connection between SubNode 4 and SubNode 6 (Bridge)SubNode 4 SubNode 6Monitor Output Connectors 1 (Output Board (1)) Camera Input Connect

65*2-1 Loop-thru Connection between SubNode 1 and SubNode 4SubNode 1 SubNode 4VIDEO OUT 1 (Input Board (1)) Camera Input Connecters 1 to 8 (Input Boar

66*2-2 Loop-thru Connection between SubNode 2 and SubNode 5SubNode 2 SubNode 5VIDEO OUT 1 (Input Board (1)) Camera Input Connecters 1 to 8 (Input Boar

67Appendix 2 ● The "sys.ini" file exampleThe "sys.ini" file configures the following definitions. - Number of Ethernet interface

68FRAMES sectionNote: • ThissectionisonlyusedforWV-SX850cagesdefinitions. • CopyeachvaluebasedontheexistingWJ-MPU850/855's&qu

69 TimeDatePosition=1,1 CamTitlePosition=1,16 MonStatusPosition=1,15 GenStatusPosition=1,14 ***{ Time-Date, Camera Title and Camera ID

7 SystemA system is a collection of one or more system domains.  AreaAn area is an entity that groups together controllers and monitors.

70 [LOG] ***{ This section is optional. It is not required unless } ***{ System defaults are not acceptable. Delete the } ***{ singl

71 ***{ option 0 - Display Alarm Text only } ***{ option 1 - Display both Alarm Text (20 chars) } ***{ and Action Text

72REDUDANT section This section assigns the RS232C Port for the redundant communication. The RS232C Port cannot be shared between the redundant com

73  ***{MaxNumber=NumberofalivemonitoringatatimeforRecorder(1-128)} CamAliveMonitoringNum=256 RecAliveMonitoringNum=128 ***

74 AliveMonitoringRetryCount_ENC=2 ***{ This section allow user to change retrieve frequency of alive monitoring} ***{ from WV-ASM970.}  **

75Appendix 3WJ-HD616/WJ-HD716 IP switch node Configuration ExampleThe WJ-HD616 and WJ-HD716 can send the video stream through the network. The WV-ASC9

76● Decoder WJ-GXD400 SetupRefer to WJ-GXD400 Operational Manual.Dec # IP Address Subnet Mask Port OSD Position Schedule Authentication ID/PasswdCame

77TroubleshootingBefore contacting technical support, please check the following symptoms and their possible causes and solutions. If the solutions su

78Client Software-Related problemsSymptom Possible cause/Possible solutionReference pageA client software WV-ASM970 cannot login to the WV-ASC970 afte

For U.S. and Canada:Panasonic System Communications Company of North America,Unit of Panasonic Corporation of North Americawww.panasonic.com/business/

8Main FeaturesImportant: • TocontroltheEBL512,itisnecessarytoregisterthelicensefortheExtensionSoftwareWV-ASE901(option)additionally

9Please note that first entry digit must be non-zero, and must not exceed 2 digits. Also, entry will overflow if the domain ID entered is greater than