Panasonic WJHD500A Instruções de Operação Página 35
- Página / 102
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
36
r Warning Display
Displays the status in case of Disk Recorder trouble.
THERMAL ✽: Indicates thermal error in the Disk
Recorder or the extension units.
(✽ indicates the extension unit number)
0: WJ-HD500A Disk Recorder
1-6: The number of an extension unit connected to
the respective Thermal Error Input terminal of
the CONTROL connector
D: DVD extension unit
HDD ✽✽%: Is displayed when the remaining space of
the Hard Disk reaches a specified value.
(✽✽ indicates the remaining capacity.)
DISK FULL: Is displayed when the remaining space of
the Hard Disk reaches 0 %.
DVD ✽✽%: Indicates the remaining space of the DVD-
RAM Disk. (✽✽ indicates the remaining capacity.)
ALTERED: Is displayed when the recorded data are
altered.
ERROR ✽-✽: Indicates access error of the Hard Disk.
(✽-✽ indicates the Hard Disk number in the Disk
Information menu)
ERROR: Indicates that the other errors have occurred.
PWR LOSS: Is displayed when the UPS
(Uninterrupted Power Supply) detects a power
failure.
WARNING ✽-✽: Indicates that the hard disk will
become failure soon. Replace ones for system
complement.
PROTECTED: Indicates that the DVD-RAM or CD-R
disk is not write enabled.
NO DISK: Indicates that the DVD-RAM or CD-R
disk is not inserted in the DVD Extension Unit or
CD-R drive.
FORMAT ERROR or
MEDIUM ERROR: Indicates that the DVD-RAM or
CD-R disk is not identified.
DVD BUSY: Indicates that the DVD Extension Unit
is not ready or is being accessed.
CD BUSY: Indicates that the CD-R drive is not
ready.
t System Status Display
Displays the system status of the Disk Recorder.
5: Indicates that data are being played back.
5 X✽: Indicates that data are being played back with
the search function.
(✽ indicates the search speed value)
y : Indicates that the playback is being paused.
COPYING: Indicates that data are being copied.
LOCKED: Indicates that the buttons are locked.
AUTO COPY: Indicates that auto-copying is in opera-
tion.
ERASING: Indicates that erasing is in operation.
CD ACTIVE: Indicates that recording on to the CD-R is
incomplete. To finish the copy, press the COPY but-
ton for 2 seconds.
y Group Display
Displays the selected group (G1, G2, G3, G4).
When all groups are selected, the display is disabled.
u Electronic Zoom Display
Displays to indicate that the zooming mode is selected.
ZOOM X✽: Indicates that the electronic zoom mode is
selected (✽ indicates a value)
i Group Title Display
Displays the group title edited in the setup menu.
o Camera Title Display
Displays the camera title edited in the setup menu.
It can also enable the alarm display set in the setup
menu when an alarm is activated.
ALARM: Receives an alarm from the ALARM port.
VMD: Detects a motion on the image
CH✽✽LOSS: Detects a video signal loss has occurred.
!0 REMOTE
Indicates that the access from network is under way.
- WJ-HD500A 1
- ENGLISH VERSION 2
- CONTENTS 3
- FEATURES 4
- PRECAUTIONS 5
- ■ Front View 6
- SIGNAL GND 8
- REMOTE(WV-CU50) 8
- GEN-LOCK OUT 8
- ■ WV-CU50 Remote Controller 10
- INSTALLATION 12
- ■ Mounting into the Rack 14
- Data Multiplex Unit WJ-MP204 15
- Controller 16
- ■ Connection with the Remote 16
- ■ Alarm Port Connection 17
- ■ Control Port Connection 18
- ● SCSI Connection 20
- ● Switch Setting 20
- Switch Settings 21
- ● Switch Settings 23
- ● MODE Selector Setting 24
- ■ Connection with the PC 25
- PREPARATIONS 26
- POWER UP PROCEDURE 27
- FORMATTING THE HARD DISK 28
- ¢¢GB 2:¢¢GB 29
- ¢¢GB 2:¢¢GB 3:¢¢GB 4:¢¢GB 29
- FORMATTING THE DVD-RAM DISK 30
- MIRRORING FUNCTION 31
- DISK REMOVE 33
- MONITORS AND DISPLAYS 34
- HARD DISK and RECORDING 36
- ■ Time Lapse Recording 37
- ■ Multi Shot Recording 37
- ■ One Shot Recording 38
- SETUP PROCEDURES 39
- SETUP MENU 40
- ■ Programming Menu Setup 41
- TIMER SETTING 42
- RECORDING SETUP 43
- ■ Group Setup 44
- ■ Playback Mode Setup 45
- ■ Jog/Shuttle Function Setup 45
- ■ Thumbnail Display Setup 45
- Manual Recording Setup 46
- Timer Recording Setup 48
- ■ Special Day Timer 49
- ■ External Program Timer 50
- ● Alarm Active Mode 51
- ● Event Recording 51
- Emergency Recording 54
- (Time Lapse Recording) 54
- MULTIPLEXER SETUP 56
- ● Auto Skip Setting 58
- Power on Status Setup 59
- Secret View Setting 60
- Live Camera View Setting 60
- ALARM SETUP 61
- ■ Alarm Buzzer Setting 62
- ■ Video Loss Alarm Setting 62
- DISPLAY SETUP 64
- ■ Alarm Display Setting 65
- COMMUNICATION SETUP 67
- ● Parity Check 68
- ● Stop Bit 68
- ● Wait Time 68
- ● Alarm Data 68
- ● Input (Camera) Number Setup 68
- ■ RS-232C Setup 69
- ■ Network Setup 70
- SYSTEM SETUP 71
- ■ Buzzer Setting 72
- ■ User Defined Setting 72
- ■ Password Lock Setting 72
- ■ Disk Management 73
- ■ System Information 74
- ■ Error Report 74
- DVD DRIVE SETUP 75
- ■ Emergency Recording Backup 76
- ■ DVD Disk End Setup 76
- ■ Disk Space Display 76
- OPERATING PROCEDURES 77
- SEQUENCE 78
- ● Zooming Single Spot (Live) 79
- ● Single Spot (Live) 79
- (4A) (4B) (4C) 82
- ALARM CONTROL FUNCTION 84
- ■ Alarm Suspension 85
- ■ Alarm Reset 85
- RECORDING 86
- ■ Alarm Recording 87
- Alarm 15 duration 88
- ■ Emergency Recording 89
- BACK FWD 90
- ■ Search Record Function 91
- Search Editing Area 92
- ■ Display on the Monitor 93
- BACKUP FUNCTION 95
- DATA ERASE FUNCTION 97
- ■ Manual Erase Function 98
- BUTTON LOCKED FUNCTION 99
- PLAYBACK OF BACKUP DATA 100
- SPECIFICATIONS 101
- STANDARD ACCESSORY 101
Manuais e produtos relacionados com Gravadores de Vídeo em Rede (NVR) Panasonic WJHD500A
(50 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.059 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais