19
● Replacement & Setup in the
SINGLE mode
When the drive has become faulty in the SINGLE mode,
perform replacement and setup as shown below.
1 SAFETY MODE ON
Select ON for HDD Safety Mode on the SETUP MENU
and press the SET button.
→ The recorder will restart and the HDD SAFETY
MODE window will be displayed.
2 Replacement of faulty HDD
• Confirm that the HDD POWER indicator on the front
panel of the extension unit has gone out.
• Replace the faulty hard disk referring to
■ Replacing/Mounting HDD.
• Go to the next step below after finishing the con-
nection of the front cover harness with the unit while
the switches and buttons remain operable (step 11
of ■ Replacing/Mounting HDD).
3 Press the RESET button.
4 SAFETY MODE OFF
• Select OFF on the HDD SAFETY MODE menu and
press the SET button.
→ HDD DISK MENU will appear when the system
check is completed.
5 Perform formatting for the new drive using the menu.
Refer to “■ Formatting the Hard Disk” of the operating
instructions of the recorder.
Comentários a estes Manuais