LOCKWV-NS202OPENBefore attempting to connect or operate this product,please read these instructions carefully and save this manual for future use.Netw
10Record images on the SD memory card manuallyImages displayed on the "Live" page can be recorded on the SD memory card manually.This button
11Action at an Alarm OccurrenceThe alarm action will be performed when the following alarms occur.Alarm typeTerminal alarm: When connecting an alarm d
12Transmit images onto an FTP serverImages can be transmitted to an FTP server. By configuring the following settings, transmission of images captured
13Save images on the SD memory card when images fail totransmit using the FTP periodic transmission functionImages that have failed to transmit using
14About the network security of the cameraEquipped security functionsThe following security functions are featured in this camera.q Access restriction
15Display the setup menu and configure the settings of the camera using a PCThe settings of the camera can be configured on the setup menu.The setup m
16Step 1Click the desired button in the frame on the left of thewindow to display the respective setup menu.When there are tabs at the top of the setu
17About the setup menu windowq [Live] buttonClick this button to display the "Live" page.w [Basic setup] buttonClick this button to display
18i [Network setup] buttonClick this button to display the "Network setup" page.The network settings and the settings relating toDDNS (Dynam
19Configure the basic settings of the camera [Basic setup]The basic settings such as time and date and camera name, and the settings relating to the N
2CONTENTSPreface ... 3About t
20• SD memory card error LED: This LED will lightwhen the SD memory card is unavailable to saveimages.• Power LED: This LED will light when the power
21Configure the settings relating to the NTP server [NTP]Click the [NTP] tab on the "Basic setup" page. (☞ page 15)The settings relating to
22 SD memory card setup[SD memory card]Select "Use" or "Not use" to determine whether or not touse the SD memory card.Default: No
23Note:When "FTP error" is selected for "Save trigger", thefile name entered for "File name" on the [FTP] tab ofthe &quo
24Copy images saved on the SD memory card onto the PC [SD memory card images]Click the [SD memory card] tab on the "Basic setup" page. (☞ pa
2 GB1 GB512 MB256 MB128 MB64 MBSize of SDmemory card25Size of SDmemory cardApprox. 32 000 picsApprox. 16 000 picsApprox. 8 000 picsApprox. 4 000 picsA
26Configure the settings relating to images and audio [Camerasetup]The settings relating to JPEG/MPEG-4 images and camera operations such as the setti
27 MPEG-4 setupConfigure the settings relating to MPEG-4 image such as "Max bit rate (per 1 client)", "Image capture size", "
28[Unicast port1 (Image)]Enter the unicast port number (used to transmit imagesfrom the camera).Available port number: 1024 - 50000 (Only even num-ber
29Configure the settings relating to the camera title and the camera operations [CamFunction]Click the [Cam Function] tab on the "Camera setup&qu
3PrefaceAbout these operating instructionsThere are 2 sets of operating instructions for the WV-NS202 as follows.• Installation Guide• Network operati
30[Upside-down]Select "ON (desktop)" or "OFF (ceiling)" to determinehow the camera is to be installed.ON (desktop): Select this wh
31Configure the settings relating to images and the preset positions [Image/Position]Click the [Image/Position] tab on the "Camera setup" pa
Configure the settings relating to image quality ("Image Adjust" setup menu)Click the [SETUP>>] button of "Image Adjust" on
33[White balance]Select a method of white balance adjustment from thefollowing.White color can be adjusted by "Red Gain" and "BlueGain&
34[DNR (Digital Noise Reduction)]When this function (digital noise reduction) is active,noise may be automatically reduced under a low lumi-nance. Sel
35Set mask areasWhen "OFF" is selected for "Super Dynamic 3", it is possible to compensate for backlight by masking brighter areas
36Configure the settings relating to the preset positions ("Preset No." setup menu)Click the [SETUP>>] button of "Preset Position
37[Preset ID (0-9, A-Z)]Enter the preset ID to be displayed on images. The pre-set IDs can be applied to each preset position.Available characters: 0-
38Configure the settings relating to the auto pan function ("Auto Pan" setup menu)Click the [SETUP>>] button of "Auto Pan" o
39Configure the settings relating to the privacy zone ("Privacy Zone" setup menu)Click the [SETUP>>] button of "Privacy Zone"
4Monitor Images on a PCThe following are descriptions of how to monitor images from the camera on a PC.Monitor images from a single cameraNotes:• When
40ZOOM buttonsFOCUS buttonsBRIGHTNESS buttonsControl pad/buttonsRefer to pages 6 and 7 for descriptions of how to oper-ate these buttons/pad.[CLOSE] b
41[Audio output volume (PC to Camera)]Select a volume level on the camera to hear audiotransmitted from the PC.Low/Middle/HighDefault: Middle[Audio ou
42Configures the multi-screen settings [Multi-screen setup]The cameras to be used for the multi-screen display can be registered on this page. Refer t
43Configure the alarm settings [Alarm setup]The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, t
44Configure the settings relating to the camera action at an alarm occurrenceClick the [Alarm] tab on the "Alarm setup" page. (☞ page 15) C
45Auto track: When a VMD alarm is detected, the cam-era will move to the home position and start the autotracking.Default: OFF[Command alarm]Select an
46Configure the settings relating to the alarm imageClick the [Alarm] tab on the "Alarm setup" page. (☞ page 15) Alarm image setupThe setti
47Configure the settings relating to the alarm out connectorClick the [Alarm] tab on the "Alarm setup" page. (☞ page 15) Alarm output termi
48Set the VMD areas [VMD area]Click the [VMD area] tab on the "Alarm setup" page. (☞ page 15)The video motion detection areas can be set on
Configure to detect motion in areas without the preset positionsConfigure whether or not to detect motion when the camera is not at the preset positio
5About the "Live" pageq [Setup] button (*1)Click this button to display the setup menu. The but-ton will turn green and the setup menu will
50Step 1Select a preset position number to which the VMD areais to be set from "Preset position select" of "VMD areasetting for Preset
51Step 5Select the detection sensitivity from the following. Theselected detection sensitivity will be applied to all theVMD areas. High/Middle/LowDef
52Configure the settings relating to the mail notification [Notification]Click the [Notification] tab on the "Alarm setup" page. (☞ page 15)
53Configure the settings relating to Panasonic alarm protocolClick the [Notification] tab on the "Alarm setup" page. (☞ page 15) Panasonic
54Configure the settings relating to the authentication[Authentication setup]The settings relating to the authentication such as users and PCs restric
55Configure the settings relating to the host authentication [Host]Click the [Host] tab on the "Authentication setup" page. (☞ page 15)The s
56Configure the settings of the servers [Server setup]The settings relating to the mail server and the FTP server can be configured on this page. The
57Configure the settings relating to the FTP server [FTP]Click the [FTP] tab on the "Server setup" page. (☞ page 15)The settings relating to
58Configuring the network settings [Network setup]The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network manage
59[Default gateway]When not using the DHCP function, enter the defaultgateway of the camera. Default: 192.168.0.1<Unavailable IP addresses for the
6u [SD] button (manual SD recordingbutton) (*2)This button will be displayed only when "Manual" isselected for "Save trigger" on t
60Notes:• The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade"and "Network Addr
61[DDNS]Select "ON" or "OFF" to determine whether or not to usethe DDNS function.Default: OFF[Host name]Enter the host name to be
62Configure the settings relating to SNMP [SNMP]Click the [SNMP] tab on the "Network setup" page. (☞ page 15)The settings relating to SNMP c
63Configure the settings relating to the FTP periodic transmission [FTP]Click the [FTP] tab on the "Server setup" page. (☞ page 15) FTP per
64Configure the schedule settings of the FTP periodic transmissionClick the [FTP] tab on the "Server setup" page. (☞ page 15) Schedule setu
65How to delete the set scheduleStep 1Uncheck the check box of the set day of the week.Step 2Click the [SET] button after completing the settings.→ Th
66Maintenance of the camera [Maintenance]System log check, firmware upgrade, and initialization of the setup menu can be performed on this page.The &q
67Upgrade the firmware [Upgrade]Click the [Upgrade] tab of the "Maintenance" page. (☞ page 15)The current firmware can be checked and upgrad
68Initialize/restart the camera [Initialization]Click the [Initialization] tab of the "Maintenance" page. (☞ page 15)Initialization of the s
69About the displayed system logError indications relating to SMTPCategoryPOP3 server errorSMTP server errorInternal errorAuthentication errorFailed t
7In this case, the camera will not move when thethumbnail image is clicked. (For example, when pre-set position 3 is unregistered, the thumbnail image
70CategoryConnection errorConnection errorTime adjustment synchronizing with NTPsucceeded.Internal errorInternal errorNo response from the serverNo re
71• Are you accessing the wrong IP address?Check the connection as follows:With the Windows command prompt,> ping "IP address of the camera&qu
6• Is the focus adjusted correctly?Adjust the focus correctly by clicking the focus but-tons.• Is there dust or dirt on the lens?Check if there is dus
73• Is any part of the camera worn out?When the camera does not move to the exact positionfrequently, the driving parts may be worn out. Contactthe de
• Isn’t the SD memory card out of order?There are limited times to overwrite on an SD memorycard. When frequently overwritten, it may be at theend of
• Are images displayed on a full screen?Audio will not be transmitted when displaying imageson a full screen.• Press the [F5] key on the keyboard of t
76• This may occur due to the display adapter and drivercombination.When this has occurred, first update the driver of thedisplay adapter to the lates
77• Click "Internet Options" on the Tools menu of InternetExplorer, and then click the [Security] tab. Then, clickthe [Custom Level…] button
78Directory Structure of Drive BDrive BFTPALARM060101060102File name 0101230601010106010102LOCALPULLFile name 0106010101060101020000000100000001LOG← D
Panasonic Canada Inc.5770 Ambler Drive,Mississauga,Ontario, L4W 2T3 Canada (905)624-5010http://www.panasonic.caPanasonic Sales CompanyDivision of Pana
8!9 Audio output button (*3)Turns on/off the audio transmission (play audio fromthe PC on the camera speaker). This button will bedisplayed only when
9Monitor images from multiple camerasImages from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) canbe d
Comentários a estes Manuais