Panasonic WV-Q126 Instruções de Operação descarregar pdf (Página 6)

3. Mount the safety wire angle (accessory) on the 2nd anchor bolt and connect the safe-

ty wire (accessory) to the angle.

Disconnect the safety wire from the 1

safety wire angle.

Engage the face marked 2 1 with the

anchor bolt.

Bend the face marked 3 2.

Connect the safety wire to the safety 4

wire angle again.

Note: To use the anchor bolt that was already installed, the use of 2 spacer nuts is helpful.

Spacer nuts

Safety wire

Spacer nuts

Safety wire angle

Existing anchor bolt

4. Remove the camera mounting stage.

Remove the 6 screws (M4).1

Rotate the camera mounting stage 2

a half-turn clockwise.

Lift the camera mounting stage and 3

remove it.

Upper side

Lower

side

Safety wire

2 Insert

1 Disconnect

3 Bend

Mark 2

Mark 1

4 Connect

Safety wire angle

Anchor bolt

Camera

mounting

stage

Screw (M4) × 6

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sem comentários

Panasonic WV-Q126 Instruções de Operação Página 6