Panasonic AW-PH400P Manual do Utilizador Página 1

Before attempting to connect, operate or adjust this product, please read these instructions completely.AW-PH400AW-RP400AW-RC400AW-RL400AW-PH400AW-RC4

Indoor Pan/Tilt Head AW-PH40010= Guide pinUse this to determine the direction in which the camera isto be mounted.> Camera mounting screws (U1/4”

Indoor Pan/Tilt Head AW-PH400AW-PH40011Parts and their functionJ Y connector [Y]This is the output connector for the camera’s videosignals.It is conn

Indoor Pan/Tilt Head AW-PH40012Installation (Be sure to ask your dealer to install the unit.)For a stand-alone installationFor installation on the ce

Indoor Pan/Tilt Head AW-PH400AW-PH40013Installation (Be sure to ask your dealer to install the unit.)3 Mounting the tally lampConnect the cable conne

Indoor Pan/Tilt Head AW-PH40014Installation (Be sure to ask your dealer to install the unit.)$ Setting the mounting direction switchSet the switch as

Indoor Pan/Tilt Head AW-PH400AW-PH40015Installation (Be sure to ask your dealer to install the unit.)$ Setting the PCB switchesThe switches on the CO

Indoor Pan/Tilt Head AW-PH40016Installation (Be sure to ask your dealer to install the unit.)$ Installing the pan/tilt headWhen installing the pan/ti

Indoor Pan/Tilt Head AW-PH400AW-PH40017$ Mounting the cameraWhen mounting the camera on the pan/tilt head, be very careful to ensure that the camera

Indoor Pan/Tilt Head AW-PH40018Installation (Be sure to ask your dealer to install the unit.)$ Attaching the wireThe wire is not provided. Use one wh

Indoor Pan/Tilt Head AW-PH400AW-PH40019Replacing the consumable parts$ Replacing the batteryThe battery has a service life of approximately 5 years.T

2Safety precautions1 indicates safety information.CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

Indoor Pan/Tilt Head AW-PH40020SpecificationsGenlock input: BNCBlack burst or composite video signalPrompter input(PROMPTER IN): BNCThrough output to

AW-PH40021MEMO

Pan/Tilt Control Panel AW-RP40022IntroductionAccessories≥ This pan/tilt control panel enables up to five AW-PH400indoor pan/tilt heads to be controll

Pan/Tilt Control Panel AW-RP400AW-RP40023Parts and their function1 EXT CONT [M/S] switchThis switch is normally kept at the [M] (master) position.Whe

Pan/Tilt Control Panel AW-RP40024Parts and their function7 IRIS [AUTO/MANU/LOCK] buttonUse this to select the method for adjusting the lens iris ofth

Pan/Tilt Control Panel AW-RP400AW-RP40025Parts and their functionB MEMORY buttonWhen one of the (C) PRESET MEMORY selectionbuttons [1] to [50] is pre

Pan/Tilt Control Panel AW-RP40026Parts and their functionM EXT CONT IN/OUT connectorsWhen an additional AW-RP400 control panel is to beprovided, conn

Pan/Tilt Control Panel AW-RP400AW-RP40027Parts and their functionP REMOTE connectorConnect an external unit to this connector to control thepan/tilt

Pan/Tilt Control Panel AW-RP40028$ Operation method1 The menu setting items are displayed when theMENU/LIMIT switch is held down for two or moresecon

Pan/Tilt Control Panel AW-RP400AW-RP40029Menu settings$ List of menu items and settingsPRIORITY MASTER, SLAVE MASTERDIRECTION PANTILTZOOMNORMAL, REVE

3Safety precautions1 indicates safety information.The socket outlet shall be installed near theequipment and easily accessible or the mains plug oran

Pan/Tilt Control Panel AW-RP40030Menu settingsDIRECTION settings (PAN, TILT, ZOOM, FOCUS, IRIS, ROTATION: NORMAL/REVERSE)When the lever or dial is op

Pan/Tilt Control Panel AW-RP400AW-RP40031Menu settingsOPTION SWITCH A to H settings(NOT USE / DEF / WIP / HEATER/FAN / LAMP / OPTION / ND / EXT / AF)

Pan/Tilt Control Panel AW-RP40032Menu settingsCONTROL SELECT MODE setting (INTERLOCK/UN-INTERLOCK)This menu item is for selecting the method used to

Pan/Tilt Control Panel AW-RP400AW-RP40033How to mount the AW-RP400 in a rackAW-RP400320mm1 Use the accessory mounting screws (M4!8 mm) to attach the

Pan/Tilt Control Panel AW-RP40034How to change the position of the connector panelThe position of the connector panel can be changed from the rear pa

Pan/Tilt Control Panel AW-RP400AW-RP40035How to replace the zoom switch1 Remove the four screws that secure the zoom lever.2 Pull out the zoom lever,

Pan/Tilt Control Panel AW-RP40036Replacing the consumable partsThe joysticks and zoom switch are consumables.Replace them if they are not working pro

Pan/Tilt Control Panel AW-RP400AW-RP40037SpecificationsInput connectorsDC 12V IN: XLR, 4 pinsCONTROL IN FROM ROP: D-SUB 29-pin, cable supplied with A

Cable Compensation Unit AW-RC40038IntroductionAccessories≥ The AW-RC400 is capable of providing cablecompensation for analog composite, analog Y/C or

Cable Compensation Unit AW-RC400AW-RC40039Parts and their function1 Power LEDThis lights up green when the (2) POWER switch is setto ON while a DC 12

4ContentsSafety precautions ... 2Operating precautions...

Cable Compensation Unit AW-RC40040Parts and their function; MONITOR1, 2 connectorsThe video signals of the cameras selected by the AW-RP400 pan/tilt

Cable Compensation Unit AW-RC400AW-RC40041How to mount the AW-RC400 in a rackUse the accessory rack-mounting adaptors and accessorymounting screws (M

Cable Compensation Unit AW-RC40042SpecificationsInput connectorsDC 12V IN: For connecting optional accessory AC adaptor (AW-PS301)G/L IN: BNC!2, auto

Roll Unit AW-RL400AW-RL40043IntroductionAccessories≥ The AW-RL400 roll unit enables a camera to be rotatedwhen it is used in combination with the AW-

Roll Unit AW-RL40044Parts and their function1 Rotary ring2 Camera mounting screw (U1/4”-20UNC)After mounting the camera, secure it firmly using thiss

Roll Unit AW-RL400AW-RL40045Installation3 Loosen the two screws of camera mounting plate which is already installed to the roll unit.Then remove the

Roll Unit AW-RL40046Installation❈ Be absolutely sure to use a screwdriver or other tool to tighten the two camera mounting screws so that the cameram

Roll Unit AW-RL400AW-RL40047Installation6 Attach the camera mounting plate to the roll unit in a way contrary to the procedure of removing it in step

Roll Unit AW-RL40048SpecificationsPan/tilt head connector: Connected to pan/tilt head using cable suppliedPerformance: Maximum load-bearing capabilit

49Connections≥ Turn off the power of all the equipment before proceeding with the connections.≥ Use the AW-PS505 as the AC adaptor for the AW-RP400 pa

5Operating precautions≥ Handle the units carefully.Dropping the units or subjecting them to strong impact may give rise to malfunctioning or accidents

50ConnectionsMotorized zoom lensIris controlConvertible cameraGenlock signalsVideo signalsVideo signal outputGenlock signal inputMonitor switching sig

51Example of system configurationConvertible cameraMONITOR1MonitorMonitorCable provided with AW-CB400Monitor switchingAW-RC400Cable CompensationUnitAW

52Operating procedures$ Turning on the power1 When using one AW-RP400, set its EXT CONT [M/S] switch to the [M] position.When two AW-RP400 units are u

53Operating procedures6 To set the counterclockwise limit of the roll unit, use the ROTATION switch to rotate the roll unit as far as the limit in the

54Operating procedures$ Genlock adjustments for the respective camerasFor details on the genlock adjustments, refer to the operating instructions of t

55Operating procedures3 Press the START POINT button.The lamps of the buttons among TRACING MEMORY buttons 1 to 10 where data can be registered now li

56Operating procedures1 Select the pan/tilt head system using one of the CONTROL SELECT buttons.When using the AW-CB400 for camera control, select the

57Operating procedures1 Select the pan/tilt head system using one of the CONTROL SELECT buttons.2 When the button corresponding to the registered pres

58Cable specificationsWhen an IAS, WAS or VAS lens (analog drive) made by Canon is usedConnect to the LENS I/F2connector on pan/tilt head.❈ The cable

59Cable specificationsWhen an IASD, WASD or VASD lens (digital drive) made by Canon is usedConnect to the LENS I/F2connector on pan/tilt head.❈ The ca

Indoor Pan/Tilt Head AW-PH4006IntroductionAccessoriesPrecautions for use≥ The stand-alone indoor pan/tilt head can be rotatedthrough 300 degrees in t

60Cable specificationsWhen an RD lens made by Fujinon is usedConnect to the LENS I/F2connector on pan/tilt head.❈ The cable lengths are approximate.

Printed in JapanVQTB0057-1 F1104S1025 DPANASONIC BROADCAST & TELEVISION SYSTEMS COMPANYUNIT COMPANY OF PANASONIC CORPORATION OF NORTH AMERICAExecu

Indoor Pan/Tilt Head AW-PH400AW-PH4007Installation precautions≥ Do not install the unit on any of its sides.≥ Avoid using the unit in the kitchen and

Indoor Pan/Tilt Head AW-PH4008Parts and their function167895234:;<=>?

Indoor Pan/Tilt Head AW-PH400AW-PH40091 Rotary headThis rotates in the horizontal direction.2 Pedestal3 POWER ON/OFF switchWhen this is set to ON, th